Automatic Mains Failure (AMF) Panel

EA Genset Enerji Çözümleri offer wide range of AMF Panel. AMF Panel means Automatic Main Failure Panel (or A.M.F.) and it is generally connected with generators. It detects the power failure and starts the generator within a certain time limit and automatically switches off when there is electricity. Amongst the many applications, these are used for the continuous monitoring of three-phase voltage/current/frequency of mains and DG and its battery voltage. The AMF panel fitted with an AMF controller such as D-700, D-500, D300, D200, D-100, DKG-225, D-500, DKG-325, DKG-507, DKG-509, DKG-309, DKG-307, DKG-209, DKG-207, DKG-109, DKG-107, DKG-105  

D-700 Advanced Genset Synchronization Controller

Tailored for the most demanding applications, the D-700 provides synchronization, load share, mains synchronization, soft transfer, AMF, ATS, Remote Start, Engine control and remote display panel functionalities in a single unit.

Easy commissioning is achieved with the automatic learning feature, a first in the industry.


D-500-MK3 Advanced Genset Controller

D-500 MK3 is a next generation genset controller combining multi-functionality and wide communication capabilities together with a reliable and low-cost design. The same controller provides synchronization, load share, AMF, ATS, Remote Start, Engine Control and Remote Display Panel functionalities. The module comes ready for remote monitoring over GSM or Ethernet with plug-in communication modules.


D-500 Advanced Genset Controller

The D-500 is a next generation genset control unit combining multi-functionality and wide communication possibilities together with a reliable and low cost design. 

The unit complies and mostly exceeds world’s tightest safety, EMC, vibration and environmental standards for the industrial category.


D-300 MK2 Genset Controller

The new D300 MK2 genset controller is a cost effective modular genset controller ready for internet monitoring through plug-in modules.

Its main advantages are multifunctionality, support for multiple topologies, harmonic analysis and detailed power measurements.


D-200 MK2 Advanced Genset Controller

The new D200 MK2 genset controller is a cost effective modular genset controller ready for internet monitoring through plug-in modules.

Its main advantages are multifunctionality, support for multiple topologies, harmonic analysis and detailed power measurements.


D-100 MK2 ADVANCED GENSET CONTROLLER

The D-100 MK2 is a next generation genset control units combining multi-functionality and wide communication possibilities together with a reliable and low cost design. The unit complies and mostly exceeds world’s tightest safety, EMC, vibration and environmental standards for the industrial category.


DKG-225 AMF Unit with Battery Charger

DKG-225, is a low cost AMF controller for 12V-DC gensets, featuring an internal battery charger and 40Amps rated fuel and crank relays. 

It reduces the material cost, panel size and production time in panels where it is used.

Thanks to the DKG-225, automatization of small gensets has become easy and cost effective.


D-500LITE-MK2 Advanced Genset Controlle

The D-500LITE-MK2 is a next generation genset control unit combining multi-functionality and wide communication possibilities together with a reliable and low cost design. The same controller provides AMF, ATS, Remote Start and Engine Control functionalities. The module comes ready for remote monitoring over GSM or Ethernet with plug-in communication modules. Various plug-in modules provide unlimited expansion capabilities allowing to meet any special requirement. The unit complies and mostly exceeds world’s tightest safety, EMC, vibration and environmental standards for the industrial category. Software features are complete with easy firmware upgrade process through USB port. The Windows based PC software allows monitoring and programming through USB, serial and GPRS. The Rainbow Scada central monitoring service allows monitoring and control of an unlimited number of gensets from a single central location.


DKG-325 Genset Control & ATS Panel

DKG-325, is a ready-to-use control and transfer panel for gasoline and diesel gensets rated up to 15kVA.

The unit incorporates all necessary components for battery charging, genset control and load transfer between mains and genset.

Gensets may be automatized using the DKG-325, without the need for any additional equipment. Thanks to the unit, automatization of small gensets has become easy and cost effective.


DKG-507 CAN/MPU Automatic Mains Failure Unit

The DKG-507 is a comprehensive AMF unit for single genset standby or dual genset mutual standby operations. 

The unit is available with MPU or CANBUS versions. The CANBUS version connects to ECU controlled electronic engines providing engine control, protection and instrumentation without extra senders.

The unit is able to initiate modem calls and send SMS messages in fault conditions through external modems.


DKG-509 CAN/MPUAutomatic Mains Failure Unit

The DKG-509 is a comprehensive AMF unit for single genset standby or dual genset mutual standby operations.

The unit is available with MPU or CANBUS versions.

The CANBUS version connects to ECU controlled electronic engines providing engine control, protection and instrumentation without extra senders. The ECU alarms are displayed in text.

The unit is able to initiate modem calls and send SMS messages in fault conditions through external modem.


DKG-309 CAN/MPU Automatic Mains Failure Unit

The DKG-309 is a comprehensive AMF unit for single genset standby or dual genset mutual standby operations.

The unit is available with MPU or CANBUS versions.

The CANBUS version connects to ECU controlled electronic engines providing engine control, protection and instrumentation without extra senders. The ECU alarms are displayed in text.

The unit is able to initiate modem calls and send SMS messages in fault conditions through external modem.


DKG-307 CAN/MPU Automatic Mains Failure Unit

The DKG-307 is a comprehensive AMF unit for single genset standby or dual genset mutual standby operations. 

The unit is available with MPU or CANBUS versions. The CANBUS version connects to ECU controlled electronic engines providing engine control, protection and instrumentation without extra senders.

The unit is able to initiate modem calls and send SMS messages in fault conditions through external modems.


DKG-209 Automatic Mains Failure Unit

The DKG-209 is a comprehensive AMF unit for single genset standby operations.

It monitors mains phase voltages, frequency and phase rotation, runs the genset in case of mains failure and transfers the load between mains and genset.

When the genset is running, it monitors the engine and the alternator and shuts-down the genset in case of failure. 

The unit is able to initiate modem calls and send SMS messages through optional external modem.


DKG-207 Automatic Mains Failure Unit

The DKG-207 is a comprehensive AMF unit for a single generating set operating in standby mode. 

In AUTOMATIC position, DKG-207 monitors mains phase voltages and controls the automatic starting, stopping and load transfer of the generating set in case of a mains failure and once the generator is running, it monitors internal protections and external fault inputs.


DKG-109 CAN/MPU Automatic

The DKG-109 is a comprehensive AMF unit for a single genset standby or dual genset mutual standby operations.

The standard model has MPU inputs. The DKG-109J model has CANBUS inputs.

The operation of the unit is controlled with front panel pushbuttons. The RUN, AUTO and STOP pushbuttons select the operating mode. Other buttons select the display parameter scroll, alarm mute and lamp test functions.


DKG-107 Automatic Mains Failure Unit

The DKG-107 is a low cost microprocessor based digital unit offering all basic functions needed for the automatic control of a genset including changeover contactors. 

The unit fits into a standard 72x72mm panel meter opening and offers a very cost effective and space saving solution for the basic genset control.


DKG-105 Automatic Mains Failure Unit

The DKG-105 automatic mains failure unit is a microprocessor based digital unit offering all functions needed for the automatic control of a genset. 

The unit fits into a standard 72x72mm panel meter opening and offers a very cost effective and
space saving solution for the basic genset control. 

In automatic mode, the unit monitors 3 phases of the mains voltage and controls the automatic starting, stopping and load transfer of the generator.

Once the generator is running, the device monitors the internal protections and external fault inputs.

Open chat
Need help?
Contact Us
Hello
Can we help you?
Call Now